Click here to get it for 19~23 USD/kg！EU&US only
Click here to download the instruction manual
Click here to download the settings
W90B is a light tough, water-washable resin, prints with notched impact strength and elongation at break superior to other water-washable resins. The resin liquid has very good flow, it is virtually odorless, cures quickly, and is not fussy about print settings. Prints are easily cleaned with water.
- Be sure to fully post-cure all parts of the print, including the bottom!
Cleaning: Just place the print in the water and shake it back and forth. Do not wash for more than 3 minutes.
- After cleaning the prints,use a hair dryer or high-pressure air gun to dry it.
- Do not place the w90b prints in water or humid environment.
- Do not discharge the cleaned waste liquid into the sewer,please put it in the sun first,filter out the solidified material,and then discharge it.
▌ Cleaning and Post-curing
▌ User Reviews
- [ Prints are easily cleaned with water ] W90B selects high-quality water-based raw materials, with low liquid viscosity and good water solubility. Even the liquid residues in the gaps of the printed parts can be easily washed out by water, so you can say goodbye to harsh and harmful cleaning agents.
- [ Good notched impact strength and elongation at break ] The toughness of W90B prints is better than that of standard resins and other water-washable resins, and can withstand certain bending and impact. As long as you post-cure the print, it won't crack, and most of the water-washable resins we've tested will crack naturally because they're not strong enough on their own.
- [ Almost odorless ] RESIONE insists on using high-quality raw materials. The raw materials of W90B have almost no odor and no volatile and irritating harmful substances. It is convenient to use at home and office.
- [ Newbie Friendly ] W90B is not picky about printing settings, even a novice can get started quickly, and it is not easy for the printed parts to be dropped, incomplete, or supports broken due to wrong settings.
- [ Comply with RoHS and SVHC(REACH) regulations ] W90B resin is fully compliant with RoHS 2.0 and SVHC (REACH) regulations, proving that the raw materials do not contain more than 200 chemical hazardous substances contained in the regulations.
▌ Compatible 3D Printer
All series of Anycubic，Elegoo，Nova3d，Peopoly，Phrozen，Epax，Creality，Zortrax, BIQU, QIDI, UNIZ, Flashforge, Voxelab, Longer, Uniformation etc. UV 395-410nm LCD resin 3D printer
All series of Anycubic，Asiga, Solus series, Miicraft, Kudo3d, Flashforge，Makex，Shining etc. UV 385-410nm DLP resin 3D printer
▌ W90B Material Data Sheet
|Shore Hardness||ASTM: D2240-05||82D|
|Tensile Strength||ASTM: D638-14||35.66MPa|
|Flexural Strength||ASTM: D790-10||38.07MPa|
|Notched IZOD||ASTM: D256-10||16.5J/m|
|Elongation at Break||ASTM: D638-14||18%|