Water Fairy water washable resin has arrived at the US and EU warehouse (excluding crystal purple), with a limited time discount!

[LITLIQ] EC51 Fast Standard ABS-like Resin (2kg)
[LITLIQ] EC51 Fast Standard ABS-like Resin (2kg)
[LITLIQ] EC51 Fast Standard ABS-like Resin (2kg)
[LITLIQ] EC51 Fast Standard ABS-like Resin (2kg)
[LITLIQ] EC51 Fast Standard ABS-like Resin (2kg)
[LITLIQ] EC51 Fast Standard ABS-like Resin (2kg)
[LITLIQ] EC51 Fast Standard ABS-like Resin (2kg)
  • Load image into Gallery viewer, [LITLIQ] EC51 Fast Standard ABS-like Resin (2kg)
  • Load image into Gallery viewer, [LITLIQ] EC51 Fast Standard ABS-like Resin (2kg)
  • Load image into Gallery viewer, [LITLIQ] EC51 Fast Standard ABS-like Resin (2kg)
  • Load image into Gallery viewer, [LITLIQ] EC51 Fast Standard ABS-like Resin (2kg)
  • Load image into Gallery viewer, [LITLIQ] EC51 Fast Standard ABS-like Resin (2kg)
  • Load image into Gallery viewer, [LITLIQ] EC51 Fast Standard ABS-like Resin (2kg)
  • Load image into Gallery viewer, [LITLIQ] EC51 Fast Standard ABS-like Resin (2kg)

[LITLIQ] EC51 Fast Standard ABS-like Resin (2kg)

$59.00
$59.00
$68.00
Sold out
Shipping calculated at checkout.

Get it for $25/kg (US and EU orders only)

Click here to download the instruction manual

Click here to download the settings

LITLIQ EC51 is a standard resin that prints quickly and supports up to 0.2mm layer heights, it can complete the printing of a 40mm high model in less than 1 hour with just a regular printer and printing mode. EC51 printed parts are easy to remove from even the most stubborn FEP films. This resin also has great fault tolerances, reducing failures and making it a good choice for novice printers.

▌ Printing Settings

▌ Attention

  • If white matter appears on the surface of the print, please increase the light-off delay time.
  • Make sure the prints are evenly exposed to UV light. Both the front and back of the print should be cured.

    ▌ Descriptions

    • Fast printing
    EC51 resin has fast curing speed and supports 0.2mm layer thickness printing. If you don’t mind the surface quality of the prints, the printing time of the same model with 0.2mm layer thickness is 1/4~1/3 of the printing time of other resins with 0.05mm layer thickness.
    • Good mechanical strength
    Compared with other standard resins, the tensile strength, flexural strength, elongation at break and notched impact strength of EC51 resin are all good and balanced.
    • Friendly for novices
    EC51 resin 3d printed parts are easy to release from the FEP film, when adding supports, the fault tolerance rate is high and the supports are easy to remove, so the 3d printing success rate is high. In addition, EC51 prints are also easy to clean.
    • Components do not settle

    The components in the EC51 resin liquid will not settle for a long time, and the printing results are stable and consistent.

    • Broad adaptability

    EC51 resin is suitable for all mainstream LCD/MSLA/DLP 3d printers on the market, including RGB or Mono screen printers.

      ▌ Cleaning and Post-curing

      • Cleaning time: 30s
      • Cleaning solvent: 95% Ethanol or IPA
      • Post-curing light source: 385-405nm UV(40W)
      • Post-curing time: 3min

      ▌ Compatible 3D Printer

      • All series of Anycubic，Elegoo，Nova3d，Peopoly，Phrozen，Epax，Creality，Zortrax, BIQU, QIDI, UNIZ, Flashforge, Voxelab, Longer, Uniformation etc. UV 395-410nm LCD resin 3D printer

      • All series of Anycubic，Asiga, Solus series, Miicraft, Kudo3d, Flashforge，Makex，Shining etc. UV 385-410nm DLP resin 3D printer

         ▌ Mechanical properties

        　 METHOD DATA
        Shore Hardness ASTM: D2240-05 88-93D
        Tensile Strength ASTM: D638-14 42-54MPa
        Flexural Strength ASTM: D790-10 59-62MPa
        Flexural Modulus ASTM: D790-10 1.8-2.2Gpa
        Notched IZOD ASTM: D256-10 10.31J/m
        Elongation at Break ASTM: D638-14 8-11%
        Viscosity（25℃） ASTM: D4212-10 568mpa.s
        Back to 主页