Click here to download the instruction manual
Click here to download the settings
LITLIQ EC51 is a standard resin that prints quickly and supports up to 0.2mm layer heights, it can complete the printing of a 40mm high model in less than 1 hour with just a regular printer and printing mode. EC51 printed parts are easy to remove from even the most stubborn FEP films. This resin also has great fault tolerances, reducing failures and making it a good choice for novice printers.
▌ Printing Settings
- If white matter appears on the surface of the print, please increase the light-off delay time.
- Make sure the prints are evenly exposed to UV light. Both the front and back of the print should be cured.
Good mechanical strength
Friendly for novices
Components do not settle
The components in the EC51 resin liquid will not settle for a long time, and the printing results are stable and consistent.
EC51 resin is suitable for all mainstream LCD/MSLA/DLP 3d printers on the market, including RGB or Mono screen printers.
▌ Cleaning and Post-curing
- Cleaning tools: Soft brush or Ultrasonic cleaner or 2 in 1Wash Cure Machine
- Cleaning time: 30s
- Cleaning solvent: 95% Ethanol or IPA
- Post-curing light source: 385-405nm UV(40W)
- Post-curing time: 3min
▌ Compatible 3D Printer
All series of Anycubic，Elegoo，Nova3d，Peopoly，Phrozen，Epax，Creality，Zortrax, BIQU, QIDI, UNIZ, Flashforge, Voxelab, Longer, Uniformation etc. UV 395-410nm LCD resin 3D printer
All series of Anycubic，Asiga, Solus series, Miicraft, Kudo3d, Flashforge，Makex，Shining etc. UV 385-410nm DLP resin 3D printer
▌ Mechanical properties
|Shore Hardness||ASTM: D2240-05||88-93D|
|Tensile Strength||ASTM: D638-14||42-54MPa|
|Flexural Strength||ASTM: D790-10||59-62MPa|
|Flexural Modulus||ASTM: D790-10||1.8-2.2Gpa|
|Notched IZOD||ASTM: D256-10||10.31J/m|
|Elongation at Break||ASTM: D638-14||8-11%|