G217 Attention

The print is translucent after cleaning.Sand the prints with coarse and fine sandpaper and spray varnish or G217 liquid, the print will become transparent.

Resin liquid and prints are transparent but slightly bluish.

After curing the prints under high-power UV light, the print may turn yellow slightly, but it will automatically fade within a few days.

Prints should not be in contact with water for a long time.

If the resin is not used in the 3D printer for more than 1 day, it is recommended to filter the resin with a filter funnel and pour it into an empty container. Do not pour the resin in the resin tank back to the original bottle to avoid contamination of other resins.