CL-TH Colored Tough Wear-Resistant Resin is now available. Currently ships from China and U.S. warehouses; expected to arrive at the German warehouse by mid-November.
CL-TH Colored Tough Wear-resistant Resin
Key Features:
Bright color
High saturation
Strong coverage
Customizable mixing
Rich colors
Excellent toughness and rigidity
Good wear resistance&scratch resistance
Low shrinkage&deformation
Firm joints
Easy printing
Other Color Selection Guide (Wear-Resistant Tough Resin):
Pure White: TH-BJD Ultra White
Pure Black: K+
Transparent: G217
Various Skin Tones: TH-BJD
Gray: TOUGH74 V2, TOUGH74, M58
Different colors can be mixed to achieve thousands of shades!
Attention:
1.Leave assembly clearance during design:
For Race Red, Forest Green, Neon Yellow-Green, Bright Yellow, Neon Orange, and Lemon Yellow resins, it is recommended to reserve 0.1 mm clearance for assembly.
For Mystic Purple, Pure Blue, Pink, and Pastel Blue resins, it is recommended to reserve 0.14 mm clearance.
2.Printing large cross-sections:
When the model reaches a large cross-sectional area during printing, a semi-cured layer may easily form on the surface. This can make cleaning difficult and lead to poor surface quality. Therefore, please hollow the model during the design stage or in the slicing software, and add drain holes at the lowest point and at large cross-section areas.
3.When printing with Bright Yellow resin:
It is recommended to use medium or heavy supports.
4.If printing fails with the official settings:
Increase the rest time after retract, rest time before release, and light-off delay by 2–3 seconds, and increase the lifting height/distance by 2–3 mm based on the original settings to ensure stable printing performance.
5.Colored resins have shallow light penetration depth:
For difficult-to-adhere resins like Bright Yellow and Race Red, if the official settings and preheated resin still cannot make the base layers stick to the build plate, it is recommended to re-level the build plate (distance of about one sheet of A4 paper from the LCD).
6.When printing articulated models:
During post-curing, pay special attention to curing the joint wear areas. Ensure UV light reaches these areas unobstructed to achieve ideal strength and functionality.
7.Finishing recommendation:
Sand progressively from coarse to fine (up to 1000 grit). Areas that turn white after sanding can be restored by wiping repeatedly with a cloth or brush dipped in leather conditioner (e.g., Pledge).
8.Bonding printed parts:
You can use cyanoacrylate adhesive (super glue).
For more detailed instructions, please contact customer service.