TH72 has arrived in US and EU warehouses!
Please select "Ships from US" for US addresses, "Ships from EU" for EU addresses, and "Ships from CN" for other countries .TH72 is a resin with long-lasting toughness. It won't get damaged easily so you dont need to be too careful when your printing with TH72, and it won't shrink and warp much over long periods of time. It's ideal for printing figurines.
TH72 requires users to be good at adding supports. For parts with higher height or larger cross-sectional area, it is recommended that the diameter of the supports body be no less than 1.2mm, and the supports should be as many and dense as possible.
For some types of 3d printers, the surface of the printed TH72 resin parts has a silky texture, and the prints will feel slightly sticky after cleaning.
The prints are not easily damaged
Hollowed out prints will not crack
Small shrinkage and deformation, very low water absorption
Even if it is a slender or thin-walled printed part, its deformation is significantly smaller than other materials after it is fully post-cured and placed for a long time. In addition, the prints will not soften or crack due to moisture absorption, the mechanical properties are stable.
The fine structure will not be damaged during cleaning
For some TH72 printed parts with extremely fine diameter or thin-walled structure, it can withstand the erosion of cleaning agents such as alcohol/IPA when being washed, ensuring the integrity of the model.
▌ Printing Settings
Layer Height: 0.05mm
Bottom exposure time: Default parameters for standard resins of machine brands
Normal exposure time: Default parameters for standard resins of machine brands*1.2
▌ Cleaning and Post-curing
- Cleaning tools: Manual cleaning or Ultrasonic cleaner or 2 in 1 Wash Cure Machine
- Cleaning time: 3mins
- Cleaning solvent: 95% Ethanol or IPA
- Post-curing light source: 385-405nm UV(40W)
- Post-curing time: 30mins
▌ Compatible 3D Printer
- All series of Anycubic，Elegoo，nova3d，Longer，QIDI TECH，Phrozen，Epax，Kelant，Wanhao，Creality，UNIZ etc. UV 405nm LCD resin 3D printer
- All series of Moonray，Flashforge，Makex，Shining etc. UV 405nm DLP resin 3D printer
▌ Mechanical properties
|Shore Hardness||ASTM: D2240-05||74-78D|
|Tensile Strength||ASTM: D638-14||23MPa|
|Notched IZOD||ASTM: D256-10||18J/m|
|Elongation at Break||ASTM: D638-14||25.4%|
|Elongation at Yield||ASTM: D638-14||9.6%|
|Water Absorption（48hr）||ASTM: D570||0.6%|