Click here to download the instruction manual
Click here to download the settings
Upgrade Notice
Based on the medium gray version of TH72 resin, we have introduced two new colors: matte gray and white. These new colors of TH72 are easier to clean than the medium gray version, do not have a shiny, reflective, or sticky surface, and have a matte finish. They are also more resistant to yellowing. Additionally, their other properties are the same as the medium gray version.
TH72 is a long-term tough resin, so you don't have to be careful when you play with prints, and it will not be easily damaged during long distance transportation. It is an ideal material for printing hair, capes, swords, etc., as well as static figures and models with hollow interiors, it can also be used as a toughening agent for other resins.
▌ Attention
-
The model with thin and less support was successfully printed with resins with good rigidity (such as standard resin, rigid resin, ABS resin, etc.), but it might will failed to print with TH72 resin instead. It's recommended when printing with TH72 resin after the following treatment: a) Add more supports at the island of the model; b) The higher the supports, the larger the middle diamete; c) The heavier the model, the thicker the supports.
-
The resin prints will be fragile after post-curing. It is not recommended to apply force to the prints immediately. Just need to wait for a while until the internal stress of the prints is completely released.
▌ Reviews
- Gnomes Paintshop
- Youtube: それつくちゃんねる / SoreTsuku
- bilibili: up鹏up
- Youtube: べにやのVlog
- Youtube: Primogenitor Prints
- Youtube: 3D Print BJD Wear Resistant Joints - RESIONE TH72 & M70 Resin Review--By Helene Holz
- Youtube: TH72 & Siraya tech Fast--Nathan Kozuch
▌ Certification
▌ Descriptions
-
The prints are not easily damaged
-
Long-lasting toughness
-
Very low water absorption
With a water absorption rate (48hr) of 0.6%, TH72 performs exceptionally well among 3D printer resins. This ensures that prints do not soften due to increased air humidity or crack from long-term moisture absorption. The prints can be used in short-term underwater operations and outdoor scenarios.
- As a toughening agent for other resins
Tests have shown that adding TH72 to rigid/standard resins significantly increases their toughness when TH72 constitutes 40% of the mixed resin, while maintaining sufficient strength.
▌ Cleaning and Post-curing
- Cleaning tools: Manual cleaning or 2 in 1 Wash Cure Machine
- Cleaning time: ≤5mins
- Cleaning solvent: 95% Ethanol or IPA
- Post-curing light source: 385-405nm UV(40W)
- Post-curing time: 15-30mins
▌ Compatible 3D Printer
-
All series of Anycubic，Elegoo，Nova3d，Peopoly，Phrozen，Epax，Creality，Zortrax, BIQU, QIDI, UNIZ, Flashforge, Voxelab, Longer, Uniformation etc. UV 395-410nm LCD resin 3D printer
-
All series of Anycubic，Asiga, Solus series, Miicraft, Kudo3d, Flashforge，Makex，Shining etc. UV 385-410nm DLP resin 3D printer
▌ Material performance parameters
| METHOD | DATA | |
| Viscosity(25℃)(mpa.s) | ASTM:D4212-10 | 516 |
| Liquid density(g/cm³) | ASTM:D4052-22 | 1.112 |
| Solid density(g/cm³) | ASTM:D792-20 | 1.198 |
| Shore Hardness(D) | ASTM:D2240-05 | 75 |
| Tensile Strength(MPa) | ASTM: D638-14 | 26.23 |
| Tensile Modulus(MPa) | ASTM: D638-14 | 541 |
| Elongation at Break | ASTM: D638-14 | 29.35% |
| Flexural Strength(MPa) | ASTM: D790-10 | 16.9 |
| Flexural Modulus(MPa) | ASTM: D790-10 | 556 |
| Notched IZOD(J/m) | ASTM:D256-10 | 27 |
| Water Absorption（24hr） | ASTM:D570-22 | 0.69% |
I've been using TH72 for about a year for printing action figure sculpts, parts and miniatures. If a print falls on the stone floor, I don't need to worry about it breaking due to this resin's properties. It holds paint well, as well, so it's very customizer friendly. Many thanks!
I love the resilience and sturdiness of this resin. I will definitely be buying more
I have tried cheap resins which are smelly and hard to get good results with, But with Resione it is quality all the way from purchase to printed results. Get your settings in place and you will get quality prints!
This resin is insane—it's flexible, doesn’t react badly to spray primer, and the paint doesn't crack even on models I printed and painted about a year ago. One thing to note is that it can be a bit too soft for some figures; if they need to bear weight, they might bend and deform. I remembered seeing a post on their social media about mixing it with K black, and the results in the video were impressive. I decided to give it a try, and it turned out perfect.
It is the first time that after completing the purchase the price is increased with special rates. In previous purchases it has not happened to me. The price of the product has increased a lot and it is very possible that you will no longer be a customer.