Holiday Notice: Sept 27 - Oct 8, 2024. No replies or shipments during this period

Tough74 Wear-resistant Tough Resin (1kg)
Tough74 Wear-resistant Tough Resin (1kg)
Tough74 Wear-resistant Tough Resin (1kg)
Tough74 Wear-resistant Tough Resin (1kg)
Tough74 Wear-resistant Tough Resin (1kg)
Tough74 Wear-resistant Tough Resin (1kg)
Tough74 Wear-resistant Tough Resin (1kg)
  • Load image into Gallery viewer, Tough74 Wear-resistant Tough Resin (1kg)
  • Load image into Gallery viewer, Tough74 Wear-resistant Tough Resin (1kg)
  • Load image into Gallery viewer, Tough74 Wear-resistant Tough Resin (1kg)
  • Load image into Gallery viewer, Tough74 Wear-resistant Tough Resin (1kg)
  • Load image into Gallery viewer, Tough74 Wear-resistant Tough Resin (1kg)
  • Load image into Gallery viewer, Tough74 Wear-resistant Tough Resin (1kg)
  • Load image into Gallery viewer, Tough74 Wear-resistant Tough Resin (1kg)

Tough74 Wear-resistant Tough Resin (1kg)

Regular price
$45.00
Sale price
$45.00
Regular price
$50.00
Sold out
Unit price
per 
Shipping calculated at checkout.

Tough74 resin is a wear-resistant, tough material with excellent surface quality, making it ideal for producing durable action figures. It offers good notched impact strength and elongation at break, while also maintaining impressive rigidity. The material has a smooth, wear-resistant surface. Movable dolls printed with Tough74 exhibit exquisite surface quality and playability comparable to traditionally manufactured products. The joints maintain tight engagement even with prolonged friction, and thin structures do not break unexpectedly during assembly or play. 

▌ Reviews

▌ Attention

  • Please fully post-cure the parts at the joint engagement positions. Ensure that these parts are exposed to UV light without obstruction in the post-curing chamber to achieve the required wear resistance

  • If the post-curing time is too long, it can cause warping of the printed parts and make them hard and brittle

  • Immediately after post-curing, the printed parts is fragile. It is not recommended to apply force to the prints. It is advisable to wait for a period of time for the prints to cool naturally to release internal stresses and restore its intended mechanical properties

      Descriptions

      • Rigid and Tough, Wear-resistant, Durable
      RESIONE Tough74 is a robust material with excellent toughness indicators such as notch impact strength and elongation at break, as well as rigidity indicators like bending and tensile strength. Its smooth and wear-resistant surface, combined with low shrinkage and fatigue resistance, ensures that joints made with it are less likely to powder, loosen, or break over long periods of friction. We recommend presetting a size gap of about 0.05mm at the joint engagement positions during modeling.
      • Fine Surface, Easy to Clean
      Tough74's formula is specially designed to produce models with smooth surfaces without losing intricate details. Printed parts are easy to clean, and after washing, the surface is non-sticky and non-reflective, providing a texture comparable to traditionally manufactured products. 
      • Good Rigidity During Printing, Reducing Failures
      Tough74 combines rigidity and toughness, providing sufficient rigidity for models and supports during printing, preventing stretching, deformation, and shifting. This helps avoid the high failure rates seen with other tough materials. When printing lightweight models like miniatures and doll parts, this material allows for the addition of fine supports, reducing damage to the model, saving post-processing time, and delivering higher quality prints and production efficiency.
      • Ideal for Drop-resistant Tabletop Game Miniatures

      Its durability, good detail, and high surface finish make Tough74 an ideal material for 3D printing tabletop game miniatures. When painting and handling models, you don't have to worry about them being damaged from accidental drops, greatly enhancing the gaming experience. However, we recommend using a layer height of 0.05mm instead of 0.02-0.03mm for miniatures to avoid significantly increased printing difficulty.

      • Especially Suitable for Sturdy Action Figures

      The wear resistance, durability, and low shrinkage characteristics, along with excellent surface quality, make Tough74 an ideal material for manufacturing articulated figures. Joints printed with it remain tight over long periods without loosening, with just the right amount of damping, allowing for free posing of figures, significantly enhancing their playability and fun.

      Print Settings

      Gray

      • Operating Temp: 25~35℃/77~95℉
        Layer Height: 0.05mm
        Exposure Time: 2~3s
        Bottom Exposure Time: 45~65s
        Lifting Height:
        LCD Screen size less than 8.9 inches: 6mm
        LCD Screen size ≥8.9 inches: ≥9mm
        Rest Time After Retract/Off times /Light-off Delay: ≥3s 

      Black

        • Operating Temp: 25~35℃/77~95℉
          Layer Height: 0.05mm
          Exposure Time: 2.4~3.6s
          Bottom Exposure Time: 55~75s
          Lifting Height:
          LCD Screen size less than 8.9 inches: 6mm
          LCD Screen size ≥8.9 inches: ≥9mm
          Rest Time After Retract/Off times /Light-off Delay: ≥3s 

        Cleaning and Post-curing

        • Cleaning method: move the handheld printed parts back and forth in the cleaning solution
        • Cleaning time: ≤5mins
        • Cleaning solvent: 95% Ethanol or IPA
        • Post-curing light source: 385-405nm UV(40W)
        • Post-curing time: 30mins

        Customer Reviews

        Based on 3 reviews
        67%
        (2)
        33%
        (1)
        0%
        (0)
        0%
        (0)
        0%
        (0)
        K
        Kurtis Joseph
        Incredible!

        I bought this stuff to print some hero ball jointed dolls. I TRIED to break it and couldn't. I am not exaggerating. The Batman ear withstood the force. I dropped everything multiple times. No breakage. Incredible. I have bought 3 more liters since!

        D
        Dravenlock
        Awesome Product (Gray Tough 74)

        Love the product works as advertised, I would love the product more if it was produced in white and a peach flesh tone. if that happened this product would be perfect!

        F
        FanAgain Collectibles
        It is certainly tough!

        The resin prints well and has amazing detail. Heat setting articulation parts take a bit longer than Anti-Impact/M58 mix, but once set, parts moves well and hold true.
        I don't know if this is a single resin formula for my figures, but it is certainly a tough solution and I will be testing it for scene parts and accessories for the figures. All-in-all, I love it!