Anti-impact Resin Durable Nylon-like
Anti-impact Resin Durable Nylon-like
Anti-impact Resin Durable Nylon-like
Anti-impact Resin Durable Nylon-like
Anti-impact Resin Durable Nylon-like
Anti-impact Resin Durable Nylon-like
Anti-impact Resin Durable Nylon-like
Anti-impact Resin Durable Nylon-like
Anti-impact Resin Durable Nylon-like
  • Load image into Gallery viewer, Anti-impact Resin Durable Nylon-like
  • Load image into Gallery viewer, Anti-impact Resin Durable Nylon-like
  • Load image into Gallery viewer, Anti-impact Resin Durable Nylon-like
  • Load image into Gallery viewer, Anti-impact Resin Durable Nylon-like
  • Load image into Gallery viewer, Anti-impact Resin Durable Nylon-like
  • Load image into Gallery viewer, Anti-impact Resin Durable Nylon-like
  • Load image into Gallery viewer, Anti-impact Resin Durable Nylon-like
  • Load image into Gallery viewer, Anti-impact Resin Durable Nylon-like
  • Load image into Gallery viewer, Anti-impact Resin Durable Nylon-like

Anti-impact Resin Durable Nylon-like

Regular price
$65.00
Sale price
$65.00
Regular price
Sold out
Unit price
per 
Shipping calculated at checkout.

Click here to download the instruction manual

Click here to download the settings

Anti-impact resin is a robust, Nylon-like material boasting impressive impact strength and tensile toughness. Its printed objects exhibit exceptional durability, with low water absorption, high dimensional accuracy, and a wear-resistant surface that ensures long-lasting performance. With its stable mechanical properties, excellent fatigue resistance, and weather resistance, this resin is ideal for creating parts that require repeatable machining, wet or underwater operation, impact resistance, snap-on features, or even end-use products.

▌ Attention

  • Anti-impact resin liquid has the characteristic smell of acrylate, which is quite pungent. It is recommended to use it in a ventilated environment or on a 3d printer with an air purifier.

  • Anti-impact liquid viscosity is relatively high (25 ℃/77 ℉, 700mpa. s), and the stiffness of thin wall or thin diameter structure is not enough, so the printing difficulty is higher than that of standard/rigid resin. When the ambient temperature is lower than 28 ℃/82.4 ℉, it is recommended to heat the resin liquid (80 ℃/176 ℉ water bath, 5-10 minutes) before printing, and increase the "Bottom lift distance"、“lifting distance” and “rest time after retract” in the slicer.

  • Prints will become soft and weak under the following conditions: liquids are stored unsealed after long-term exposure to air (especially in the environment with high humidity); Clean with solvent or ultrasonic for more than 5 minutes. The solution when the prints becomes soft is to place them in thermostatic drying oven at 60-80 ℃ (140-176 ℉) for 30 minutes before post curing. The prints will become harder and more stable.

    Reviews

      Descriptions

      • High impact strength and tensile toughness
      The prints can absorb energy well without being damaged under high-speed impact. The elongation at break (81-100%) and fracture stress are very high. The impact toughness and tensile toughness are both good and the toughness can be maintained for a long time. It is an ideal material for printing high toughness impact resistant parts.
      • Mechanical properties are similar to nylon and stable for a long time
      Anti-impact has an excellent balance between hardness and toughness. The prints are quite wear-resistant and fatigue resistant, the mechanical properties are similar to that of thermoplastic material--nylon. In addition, Anti-impacts prints will not become hard and brittle in the short term like other tough resin prints, their mechanical properties are stable in the long term, they are suitable for printing repeatable machined, impact resistant, snap on or movable parts, or even end use products.
      • Low water absorption, low temperature resistance, good weatherability
      The water absorption is as low as 0.46%, which can meet the needs of some humid environments or underwater operations. In addition, the mechanical properties of the printouts in winter, summer or dry and wet environments have little difference, the weatherability is good.
      • High dimensional accuracy, fine and wear-resistant surface

      Anti-impact prints can meet the tolerance requirements of the outer diameter and aperture of the same printed part at the same time, with high dimensional accuracy. And the special formula makes the printing surface smooth and delicate, wear-resistant and scratch resistant.

      • Special smell, and not suitable for novices

      Anti-impact resin liquid has the characteristic smell of acrylate, which is quite pungent. Anti-impact liquid viscosity is relatively high (25 ℃/77 ℉, 700mpa. s), and the stiffness of thin wall or thin diameter structure is not enough, so the printing difficulty is higher than that of standard/rigid resin. When the ambient temperature is lower than 28 ℃/82.4 ℉, it is recommended to heat the resin liquid (80 ℃/176 ℉ water bath, 5-10 minutes) before printing, and increase the "Bottom lift distance"、“lifting distance” and “rest time after retract” in the slicer.

        ▌ Cleaning and Post-curing

        • Cleaning time: 3mins
        • Cleaning solvent: 95% Ethanol or IPA
        • Post-curing light source: 385-405nm UV(40W)
        • Post-curing time: 30-60mins

        ▌ Compatible 3D Printer

        • All series of Anycubic,Elegoo,Nova3d,Peopoly,Phrozen,Epax,Creality,Zortrax, BIQU, QIDI, UNIZ, Flashforge, Voxelab, Longer, Uniformation etc. UV 395-410nm LCD resin 3D printer

        • All series of Anycubic,Asiga, Solus series, Miicraft, Kudo3d, Flashforge,Makex,Shining etc. UV 385-410nm DLP resin 3D printer

          Mechanical Properties

            METHOD DATA
          Shore Hardness ASTM: D2240-05 78D
          Tensile Strength ASTM: D638-14 21-28MPa
          Flexural Strength ASTM: D790-10 29-37MPa
          Flexural Modulus ASTM: D790-10 650-1076MPa
          Notched IZOD ASTM: D256-10 46-72J/m
          Elongation at Break ASTM: D638-14 81-100%
          Elongation at Yield ASTM: D638-14 7.8-8.7%
          Water Absorption ASTM: D570 0.46%
          Viscosity(25℃) ASTM: D4212-10 715mpa.s