K Attention

  • Before printing: confirm whether the build plate is flat, and level the plate.Especially the 3D printers with a print size of more than 8.9 inches.

  • Leveling:place 4 sheets of paper on the 4 corners between the plate and LCD screen, press the plate and tighten the screws in diagonal order.

  • Post-curing: both the front and back sides of the prints should be cured.The longer the post-curing time, the harder but more brittle the prints, especially thin parts. If it is a 40W UV light source, the recommended post-curing time should not exceed 10 minutes.

  • Prints should not be in contact with water for a long time.

  • If the resin is not used in the 3D printer for more than 1 day, it is recommended to filter the resin with a filter funnel and pour it into an empty container. Do not pour the resin in the resin tank back to the original bottle to avoid contamination of other resins.