Do not place the w90b prints in water or humid environment for a long time.
Cleaning Method: Just place the print in the water and shake it back and forth, no toothbrushes, no ultrasonic cleaner.
After cleaning the prints,use a hair dryer or high-pressure air gun to dry it.
Do not discharge the cleaned waste liquid into the sewer, please put it in the sun first, filter out the solidified material, and then discharge it.
If the resin liquid in resin tank will not be used for more than 1 day, it is recommended to filter the resin with a filter funnel and pour it into an empty container. Do not pour the resin in the resin tank back to the original bottle to avoid contamination of other resins.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.