
Click here to download the instruction manual
Click here to download the settings
D01 is a yellow-orange high-precision dental model resin. Prints have accurate dimensions, scratch-resistant surface, and can withstand the short-term high temperature of the vacuum moulding process. It is suitable for printing restoration、implant、study and orthodontic dental models. At the same time, the prints are easy to clean.
▌ Features
- Suitble for vacuum thermoforming
- Very easy to clean
- Accurate size, smooth and wear-resistant surface
▌ Applications
- Restoration model for dental
- Implant model for dental
- Study model for dental
- Orthodontic model for dental
▌ Cleaning and Post-curing
- Cleaning: You can use the ethanol(concentration≥95%), or IPA. D01 resin prints can be cleaned with ultrasonic cleaning or a special cleaning machine for 3D printing and the cleaning time is less than 1min. After cleaning, use compressed air to dry the prints.
- Post-curing: If you use a post-curing box with a power of 40W, our recommended post-curing time is about 20min*2 (Adjust the post-curing time according to the power of the post-curing box, the greater the power, the shorter the time). So you can get a dry surface print.Both the front and back of the dental model need to be post-cured to prevent the print from shrinking and deforming
▌ Compatible 3D Printer
-
All series of Anycubic,Elegoo,Nova3d,Peopoly,Phrozen,Epax,Creality,Zortrax, BIQU, QIDI, UNIZ, Flashforge, Voxelab, Longer, Uniformation etc. UV 395-410nm LCD resin 3D printer
-
All series of Anycubic,Asiga, Solus series, Miicraft, Kudo3d, Flashforge,Makex,Shining etc. UV 385-410nm DLP resin 3D printer
▌ Material Data Sheet
METHOD | DATA | |
Shore Hardness | ASTM: D2240-05 | 85-90D |
Tensile Strength | ASTM: D638-14 | 27MPa |
Flexural Strength | ASTM: D790-10 | 39MPa |
Elongation at Break | ASTM: D638-14 | 12% |
Viscosity(25℃) | ASTM: D4212-10 | 300mpa.s |
Notched IZOD | ASTM: D256-10 | 14J/m |
▌ The difference between D01 and D01S
- Color:D01 is yellow-orange, D01S is seashell
- D01S is not easy to produce bubbles
- D01S shrinks less
- D01 is more suitable for orthodontic applications