K+ Black Tough ABS-Like Resin (1kg)

Click here to download the settings

K+ has undergone a formula upgrade based on K resin, making it an ideal material for producing functional parts or assemblies. K+ and K printed parts have similar physical properties—High stiffness and toughness, extremely high dimensional and detail accuracy. However, K+ has lower water absorption and better scratch resistance compared to K, which makes K+ more widely used, such as for parts operating in high humidity environments or components that require repeated disassembly and assembly. In addition, the K+ printed parts are pure black and will not appear blue purple in sunlight, with a texture and mechanical properties similar to those of injection molded parts.

▌ Attention

• K+ resin liquid has a special odor
• Excessive post-curing or low temperature will make prints brittle
• Do not apply too much force to the prints just after post-curing, it will take several hours for the prints to reach the mechanical properties they should have

▌ The difference between K+and K

• K+ resin has some special odors compared to K
• The K+ prints are pure black, while the K prints will show a deep blue purple color in sunlight
• The water absorption of K+ printed parts is lower than that of K
• K+ is scratch resistant, while K is not scratch resistant

▌ Descriptions

• Stiff and Tough, High Strength

• High Precision, Sharp Details

• Low Water Absorption Printed Parts

• Scratch Resistance

• Pure black, with a texture similar to that of injection molded parts

K+ resin is a pure black liquid, and printed parts will not appear blue purple in sunlight like K resin. It has a delicate texture similar to injection molded parts, the appearance is high-end and good-looking. It is an ideal material for producing appearance verification prototypes, artworks, interior decorations, and toy accessories.

▌ Print Settings

• Operating Temp: 20~35℃/68~95℉
• Layer Height: 0.05mm
• Exposure Time: 3.3~5s
• Bottom Exposure Time: 50~70s
• Lifting Height:
  LCD Screen size less than 8.9 inches: 6mm
  LCD Screen size ≥8.9 inches: ≥9mm
• Rest Time After Retract/Off times /Light-off Delay: ≥2s
• "Anti-aliasing"/"Grayscale" remains OFF！

▌ Cleaning and Post-curing

• Cleaning time: ≤5mins
• Cleaning solvent: 95% Ethanol or IPA
• Post-curing light source: 385-405nm UV(40W)
• Post-curing time: 10min
  

▌ Compatible 3D Printer

• All series of Anycubic，Elegoo，Nova3d，Peopoly，Phrozen，Epax，Creality，Zortrax, BIQU, QIDI, UNIZ, Flashforge, Voxelab, Longer, Uniformation etc. UV 395-410nm LCD resin 3D printer

• All series of Anycubic，Asiga, Elegoo, Solus series, Miicraft, Kudo3d, Flashforge，Makex，Shining etc. UV 385-410nm DLP resin 3D printer

▌ Mechanical Properties